1983 AHSME Problems/Problem 30

Problem

Distinct points $A$ and $B$ are on a semicircle with diameter $MN$ and center $C$ . The point $P$ is on $CN$ and $\angle CAP = \angle CBP = 10^{\circ}$ . If $\stackrel{\frown}{MA} = 40^{\circ}$ , then $\stackrel{\frown}{BN}$ equals

$[asy] import geometry; import graph; unitsize(2 cm); pair A, B, C, M, N, P; M = (-1,0); N = (1,0); C = (0,0); A = dir(140); B = dir(20); P = extension(A, A + rotate(10)*(C - A), B, B + rotate(10)*(C - B)); draw(M--N); draw(arc(C,1,0,180)); draw(A--C--B); draw(A--P--B); label("$A$", A, NW); label("$B$", B, E); label("$C$", C, S); label("$M$", M, SW); label("$N$", N, SE); label("$P$", P, S); [/asy]$

$\textbf{(A)}\ 10^{\circ}\qquad \textbf{(B)}\ 15^{\circ}\qquad \textbf{(C)}\ 20^{\circ}\qquad \textbf{(D)}\ 25^{\circ}\qquad \textbf{(E)}\ 30^{\circ}$

Solution 1

Since $\angle CAP = \angle CBP = 10^\circ$ , quadrilateral $ABPC$ is cyclic (as shown below) by the converse of the theorem "angles inscribed in the same arc are equal".

$[asy] import geometry; import graph; unitsize(2 cm); pair A, B, C, M, N, P; M = (-1,0); N = (1,0); C = (0,0); A = dir(140); B = dir(20); P = extension(A, A + rotate(10)*(C - A), B, B + rotate(10)*(C - B)); draw(M--N); draw(arc(C,1,0,180)); draw(A--C--B); draw(A--P--B); draw(A--B); draw(circumcircle(A,B,C),dashed); label("$A$", A, NW); label("$B$", B, E); label("$C$", C, S); label("$M$", M, SW); label("$N$", N, SE); label("$P$", P, S); [/asy]$

Since $\angle ACM = 40^\circ$ , $\angle ACP = 140^\circ$ , so, using the fact that opposite angles in a cyclic quadrilateral sum to $180^{\circ}$ , we have $\angle ABP = 40^\circ$ . Hence $\angle ABC = \angle ABP - \angle CBP = 40^ \circ - 10^\circ = 30^\circ$ .

Since $CA = CB$ , triangle $ABC$ is isosceles, with $\angle BAC = \angle ABC = 30^\circ$ . Now, $\angle BAP = \angle BAC - \angle CAP = 30^\circ - 10^\circ = 20^\circ$ . Finally, again using the fact that angles inscribed in the same arc are equal, we have $\angle BCP = \angle BAP = \boxed{\textbf{(C)}\ 20^{\circ}}$ .

Solution 2

$[asy] import geometry; import graph; unitsize(4 cm); pair A, B, C, M, N, P, Q, R; M = (-1,0); N = (1,0); C = (0,0); A = dir(140); B = dir(20); Q = dir(-20); R = dir(-40); P = extension(A, A + rotate(10)*(C - A), B, B + rotate(10)*(C - B)); draw(M--N); draw(circle(C,1)); draw(A--C--B); draw(A--P--B); draw(A--Q--C); draw(A--R--C); draw(A--B); draw(B--Q); label("$A$", A, NW); label("$B$", B, E); label("$C$", C, SW); label("$M$", M, SW); label("$N$", N, SE); label("$P$", P, S); label("$Q$", Q, SE); label("$R$", R, SE); [/asy]$

Complete the circle centered at $C$ and extend $AP$ and $AC$ to meet the circle at $Q$ and $R$ , respectively. So $\stackrel{\frown}{NR} = \stackrel{\frown}{MA} = 40^\circ$ , and $\stackrel{\frown}{QR} = 2 \cdot 10^\circ = 20^\circ$ . Therefore, $\stackrel{\frown}{NQ} = 40^\circ - 20^\circ = 20^\circ$ .

Since $CA = CQ$ , $\triangle CAQ$ is isosceles and $\angle CQA = \angle CAQ = 10^\circ$ . Let $\theta = \angle CBQ = \angle CQB$ . Then $\angle PBQ = \angle PQB = \theta - 10^\circ$ , so $\triangle PBQ$ is isosceles with $PB = PQ$ . So $CN$ must bisect $\angle BCQ$ , and $\stackrel{\frown}{BN} = \stackrel{\frown}{NQ} = \boxed{(\mathbf{C})\ 20^{\circ}}$ .

-j314andrews

Video Solution

https://youtu.be/fZAChuJDlSw?si=wJUPmgVRlYwazauh

~ smartschoolboy9

1983 AHSME (Problems • Answer Key • Resources)
Preceded by Problem 29	Followed by Last Problem
1 • 2 • 3 • 4 • 5 • 6 • 7 • 8 • 9 • 10 • 11 • 12 • 13 • 14 • 15 • 16 • 17 • 18 • 19 • 20 • 21 • 22 • 23 • 24 • 25 • 26 • 27 • 28 • 29 • 30
All AHSME Problems and Solutions

Page

Toolbox

Search

1983 AHSME Problems/Problem 30

Contents

Problem

Solution 1

Solution 2

Video Solution

See Also